The building site must be at lockup stage and the timber floor should be installed after the tiler and electrician but before the final coat of painting and the carpet installation.
Windows that expose the timber floor to direct sunlight should be covered to prevent timber movement. Allow for ventilation throughout the home and your timber floor can be greatly affected by an air conditioner. Please ask if you would like to know more.
The power source needs to be no greater than 15 metres from the furthest point of flooring as power drain from long leads can damage equipment. The concrete slab needs to be clear of any large objects and needs to be scraped and cleaned.
You may chose from different finishes. Matt, Semi Gloss, Gloss, High Gloss and water based are a few of them, please ask if you would like to know more.
Natural features such as gum vein, birds eye and pin holes are natural characteristics of timber flooring, making each floor unique. It is important to understand that no two floors are the same, even if they are from the same species, the same age and the same area, there will still be variation in colour, tone and marking.